|
 |
|
|
|
| |
Nolan's CS-60 Car Stops
(used in right and left pairs) |
Model CS-60 Car Stops
Nolan's model CS-60 is a hinged-type car stop designed for permanent installation on either flush or exposed rails. In the raised position, the CS-60 protects workers, warehouse doors, crossover walks, etc., or it swings down out of the way. The CS-60 may be padlocked (padlock not included) in either the up or down position.
IMPORTANT NOTE: Car Stops are sold per unit, but must be used in pairs. A pair consists of one right-hand stop and one left-hand stop.
| Weight Each |
91 lbs. (41 kgs) |
| For Use On Rails |
Specify rail size |
|
|
|
CS-60L Car Stop in UP position
|
CS-60L Car Stop in DOWN position
|
|
CS-60R Car Stop in UP position
|
CS-60R Car Stop in DOWN position
|
|
|
|
CS-50 Car Stops
|
Model
CS-50 Car Stops
The Nolan model
CS-50 is a worldwide industry stand-by, used when heavy and expensive
bumping posts are not required. Rugged, yet simple to handle and
attach, the CS-50 utilizes four
1" (25mm) diameter bolts and two
wedge-type clamping plates for mounting. As the car bumps the CS-50,
the wedge design tightens its hold on the rail. No drilling is required
when mounting these car stops that are cast in special ductile alloy.
IMPORTANT NOTE: Car
Stops are sold per unit, but must be used in pairs.
| Weight
Each |
135 lbs. (61 kgs) |
| For
Use On Rails |
60-140
lbs. (27-64 kgs) |
|
|
|
CCS-2 Car Stops
|
Model CCS-2 Car Stops
Nolan type CCS-2 cushioned car stops transfer impact force directly to the cushioning tie and ballast. The CCS-2 utilizes car's weight for additional braking friction on rail. Universal fit, all welded steel construction. Four bolts for installation per pair. No holes to drill.
IMPORTANT NOTE: Car Stops are sold per unit, but must be used in pairs.
| Height Above Rail |
17" (432 mm) |
| Weight Each |
180 lbs. (82 kgs) |
| Fabrication |
All Welded |
| Finish |
M/W safety yellow |
| For Use On Rails |
60-141 lbs. (27-64 kgs) |
|
|
|
|
TRANSLATE PAGE |
Select Language Below
|
|
|
